DIY Brother Scan N Cut Workstation (17)

My First MDF Design – A Brother Scan N Cut Workstation

Well hello there! In the last few weeks, I have been exploring the world of MDF, more specifically, designing for laser cutting and creating DIY construction kits.

In this post, I will share with you that journey and the result!

Before I begin, let me tell you that I have included so many images that I have had to split this post over 3 pages so when you get to the end of this page, just use the handy page number links to skip onto the next page.

So, to the beginning of this design adventure!

Well, I decided some time ago that I wanted to create a platform for my Scan N Cut machine that would offer me several benefits.

Those were:

  1. A stable and level platform to use my machine on without having to use it on a table.
  2. A stable and level platform for the mat to run on at the front and back.
  3. A place to store accessories and mats.

So, I started the design process in Microsoft 3D Builder, a free 3D design tool bundled with Windows 10.

This software isn’t very technical but my goal was to work in three dimensions so that I could understand where parts connected and what dimensions would work.

A wee bit of tinkering later and I had my first draft.

DIY Brother Scan N Cut Workstation (16)

Great to see it in 3D as I can zoom and pan around to check it all out.

Now to start mapping out the pieces in Adobe Illustrator. The reason that I chose to work in Illustrator was that it is the perfect and most professional tool for creating vector drawings which, when it came to last cutting, would be essential.

One thing crossed my mind at this point and this was that I didn’t know what size the MDF sheets would be that would be used to cut the design so I went on the hunt for a laser cutting company that did custom cutting services and found

Not only were they able to help with information on the sheet size but they were able to offer help on design parameters for submitting designs for cutting.

Armed with this information I returned to Illustrator and got plotting. *copious mouse clicking ensues.

Several attempts, and a little bit of swearing later, I again had a first draft of the cutting file.

Because of the size of the project that I was planning I had to spread this across two sheets of MDF.

DIY Brother Scan N Cut Workstation (18)

Lines marked up as appropriate and files exported it was time to send this off to Laser Smith and get it cut!

What seemed like an incredibly speedy turnaround, especially considering the snow, there was a knock at my door and there stood a delivery guy with a large package in hand!

Stop sniggering you, naughty people.

No, it was this!

DIY Brother Scan N Cut Workstation (1)

How piggin’ exciting!

Now, where the heck did I put my special parcel opening scissors? FYI, they are just the bog standard pair that I often think that I have stored in the kitchen drawers but often find somewhere else having used them to open some package or other.

After only a minor hunt as, oddly, I found them in the kitchen drawers (?!) and I was hacking away at the packaging with gay abandon.

DIY Brother Scan N Cut Workstation (2)

The aroma of laser-cut MDF filled the air and I inhaled and exhaled at the joyful scent and the thought of putting together some flat pack. *happy sigh.

Double checking that all of the ‘bits’ were there, I grabbed my tacky glue and set to work.

Step 1. Glue in the support struts and then the middle shelf.

DIY Brother Scan N Cut Workstation (3)

Step 2. Stick the sides and centre panels on. A little trickier as there were various tabs and slots to line up but it went together well.

DIY Brother Scan N Cut Workstation (4)

DIY Brother Scan N Cut Workstation (5)

Step 3. Stick on the front and back panels.

DIY Brother Scan N Cut Workstation (6)

Almost done.

Step 4. Insert the tray tops, no glue this time as these will be removable so that I can access the storage trays, hence the finger holes – designed especially for podgey digits like mine.

DIY Brother Scan N Cut Workstation (7)

Construction complete!

Time to see if it lived up to the three pre-requisites that I had designed it for…


49 thoughts on “My First MDF Design – A Brother Scan N Cut Workstation

  1. That’s a great idea a place for everything (scanncut bits and bobs) and everything in it’s place I would love to have one maybe two one for the scanncut and one for my cameo 3 you have such great ideas

    Liked by 1 person

  2. Brilliant idea! Well done! It might be an idea to decoupage the lids with clocks, watches, cogs etc as this machine saves us so much time, though I would be tempted to zentangle it. Liz X

    Liked by 1 person

  3. That….is…..AMAZING…..want one does not even cover just how many of these would sell overnight. Any chance we will be able to order them in the future?

    Liked by 1 person

  4. You have such a wonderful creative mind love this idea john by the way I currently store my SnC mats by hanging from back of craftroom have kept them in original plastic bag covering and hang with plastic trouser hanger

    Let us know when you have your idea available

    Liked by 1 person

  5. Well I am very impressed. Laser Smith is about 10 mins from me. Well don’t think it’s a franchise…. Had I known they were cutting something for you I would have popped in to see what was going on!
    I love your design and it would be so useful so put me down for one. You really are a clever crafter! 😜 Plz

    Liked by 1 person

  6. Brilliant. Love the design, and of course want one…NOW!!!!! Seriously though John, will they be available? Love the storage, especially for mats

    Liked by 1 person

  7. John this is amazing!!! I too would love to purchase a unit like this for my machine… but I live in the US and just the shipping alone would kill me. BUT I am so impressed!!!

    I do keep my sNc on it’s own table… however, ‘stuff’ tends to build up around it.

    Liked by 1 person

  8. What a brilliant idea. I think you have come up with a winner. I would definitely buy one if you decide to sell them.


  9. I’m impressed. You never cease to amaze me, in fact I would go as far as very impressed. What overall size is it, or have I floated past measurements without taking it in? xx

    Liked by 1 person

  10. It’s great thinking John, looks amazing. Can you use this also on a stool?
    I just wrote in the free svg file post that I wanted to use the file to make a stencil of it, perhaps you can do also and use it for decoration of this great workstation!

    Liked by 1 person

  11. Oh and PS how about two extra platform boxes that are loose and could be added when cutting/scanning 24 length mats? or would these not be needed?

    Liked by 1 person

Leave a Reply to woofers53 Cancel reply

Please log in using one of these methods to post your comment: Logo

You are commenting using your account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.