Acrylic Paint Pouring Made Easy

GCTV 4 – Affordable Acrylic Paint Pouring With Cells Made Easy Part 3

Time for part 3 of the Affordable Acrylic Paint Pouring With Cells Made Easy series. In this post, I will explain the pouring and cell forming method.

Just reminder, if you would prefer to watch and listen rather than read then you may like to know that I have a full-length video over on explaining everything in this blog posts series.

Click Here To Watch Affordable Acrylic Paint Pouring With Cells Made Easy Full Length Video

In part two we created out first pouring colour. You would of course have gone on to repeat this for each colour that you wanted to use.

This means that you are now ready to pour – almost.

First, make sure that your work surface is protected. You can either use a tray of some sort or cover your work area with plastic bin liners.

Next, grab a few of your measuring cups and place them on your work surface, spaced out so that it raises your ‘canvas’ up off the table top.

Acrylic Paint Pouring Method

Now, we will be doing a ‘dirty’ pour.

This is when you put all of the colours in one pouring ‘jug’ and then pour that onto your ‘canvas’.

Fill your pouring jug by drizzling the colours down the inside edge.

Acrylic Paint Pouring Jug

Get your canvas in position and then pour!

You can either pour it so that it all flows out from the centre or you can make patterns by pouring in a zig zag fashion.

Acrylic Paint Pouring The Pour

Now let the paint flow for a few moments.

Time for some cells!

Grab the WD40. Make a swift spritz across the surface of the canvas. DON’T SPRAY TOO MUCH AS IT WILL CREATE TOO MANY CELLS!

Acrylic Paint Pouring WD40

The cells will form immediately.

Let these grow for a about 60 seconds.

Then, if you would like to pick the canvas up and let the paint run in various directions go for it!

Acrylic Paint Pouring Dribble

Now it is time to set it to one side and let it dry.

Drying time will vary from 12 to 48 hours depending on the thickness of the pouring paint, the size of the project and the ambient temperature in the room.

Don’t try and force this as it may form cracks or other unwanted results. Be patient. Lol!

Then, if you want to give it a coat of something to seal it, feel free. You don’t need too tho.

That my friends is that!

Don’t forget, if you would prefer to watch and listen rather than read then you may like to know that I have a full-length video over on explaining everything in this blog posts series.

Click Here To Watch Affordable Acrylic Paint Pouring With Cells Made Easy Full Length Video

For now, I shall leave you with a warning – THIS IS VERY ADDICTIVE!

Many thanks for visiting and reading and don’t forget there are handy sharing links if you fancy tweeting, liking, pinning or whatever else you spring chickens do with your gadgets.

Bye for now.

J :)

5 thoughts on “GCTV 4 – Affordable Acrylic Paint Pouring With Cells Made Easy Part 3

  1. Wish I had seen this earlier as it’s very difficult to find the ingredients when it’s almost all Americans on YouTube . This was so easy to follow.

    Like

  2. Ooooooh right up my street….now whereto put stuff so the dog doesn’t become colourful (again) or add pawprints to the carpet ….then again…??? Hmmmm. Cheers!

    Liked by 1 person

Leave a Reply to Sheila Cancel reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.