Brother Scan N Cut Updates – November 2016

November 8, 2016 — 27 Comments

I was just signing in to Brother Scan n Cut Canvas and noticed that there had been some updates for Canvas and for the Scan N Cut machines so I’ve had a quick reccy and put together some basic facts for Scan N Cut users.

Please bear in mind that this post was written with users in my home country of the United Kingdom in mind but as far as I’m aware these updates will most likely be similar across the globe. To find out if these apply to you, simply visit the Brother Solutions page for your country and find out more.

Let’s take Canvas first.

The first thing that I should say is that you don’t need to actually update anything for the changes in Canvas as the next time that you log in, all of the changes will already be in place.

So, what’s changed?

The update for Canvas v2.3.2 wasn’t huge. You could tell that this wasn’t going to be by the fact that it was just the last number that had changed.

It was no surprise therefore to learn that only one new feature had been added. It’s quite an exciting one though as it shows that a ‘Foiling Function’ has been added.

As with all premium functions on the Scan N Cut a Foil Transfer Starter Kit is indicated as the corresponding accessory that will soon be on it’s way. No release date is shown.

Some other ‘minor fixes’ were also listed.

Now, let’s look at the machines.

The updates and software versions differ a little between the four machines that have appeared on the UK market so I’ll list all of them below.

CM300 & CM600DX – Version 1.810 (November 2016)

This new version lists just a premium function being added which is of course relating to the foiling function shown in the Canvas update.

Some other ‘minor fixes’ were also listed.

CM700 & CM900 – Version 2.30 (November 2016)

This new version lists two updates.

The premium function has been added which is of course relating to the foiling function shown in the Canvas update.

In addition to this ‘Automatic Update Function via a wireless network’ was added or changed.

Some other ‘minor fixes’ were also listed.

If you are wondering where to find the updates and how to update your machine, just head over to Scan N Cut Canvas and look at the scrolling news section at the bottom of the screen. There will be a ‘machines have been updated’ article with a link, just click on that and the rest should make sense.

Brother Scan N Cut Canvas Homepage

I hope that this information has been of use to you.

If you would like to see the other tutorials, projects and cutting files that I have created for and about the Scan N Cut series of machines, please do check out the following links:

To buy the Scan N Cut in the UK you can head over to the exclusive retailer, Create and Craft TV.

Many thanks for reading. Catch you again soon.

J :)

27 responses to Brother Scan N Cut Updates – November 2016

  1. 

    I have been playing with the foiling kit and found that I have been able to use my stash of Tonertex foils over the glue – and have made interesting patterns using all my multi coloured scraps. I couldn’t be bothered to change heads and let it run for another 3 minutes with the rubbing head. It was much quicker to run over with my brayer – took all of 10 seconds. Fab results.

    Like

  2. 

    Thanks for all this information, really helpful!

    Like

  3. 

    Hi John
    I’ve been trying to update my scanncut CM700 to version 2.30, I purchased a new USB pen drive and went through the instructions on the Brother Solutions website, all seemed well until I checked by holding down both buttons as I switched but the display still states its version 2.20. I have updated before and feel I have done nothing wrong but obviously something is wrong can you help please? After trying 6 times I noticed that when I click on the spanner and scrolled to the version it says its 2.30, I’m puzzled as to why the screen display is still Version 2.20, so I think it’s updated the machine but not the screen.
    Thank You
    Sue

    Like

  4. 

    Hi john, please help. After i have updated my machine with usb, can i then clear the usb and use it again, and will the updates still stay on my machine? Also when are you coming to cardiff?
    Ta much
    Linda Sutton

    Liked by 1 person

  5. 
    Rosemary Hartfield November 11, 2016 at 12:12 pm

    John, I downloaded the ScanNcut version – put the USB into SnCut – got ‘can’t find the
    download. My machine says I have 1 70 and the new one is for below 1 80. Can you
    please help

    Like

  6. 

    Do we really have to wait until 2017 for these updates? :)

    Like

  7. 

    John can you tell me when scanncut accessary foil transfer foil kit be coming out Kind regards Stephen

    Sent from my iPad

    >

    Liked by 1 person

  8. 

    Thanks for the information John, much appreciated. Just want to extend my sympathy to Lorraine, although I can’t imagine how awful it must be for you. I was very good when I first got my CM300, I tried it straight away, but like you, my first efforts weren’t very successful. I left it alone for a while, but it was on my desk so I couldn’t forget it. Gradually, I started using it, and now wouldn’t want to be without it. It’s a very clever machine, and is now beginning to be fun. Hope you get on ok with it, and John has done some lovely cutting files on the web site. Take care. Anne x

    Liked by 1 person

  9. 

    Thanks for the notification about the update.
    Here’s the link to the YouTube video for the foiling.

    Liked by 1 person

  10. 

    Hey John

    Not a Scan N Cut user but it was only a year and I half since I was a newbie to my cutting machine and I had to do a lot of self study! It’s so kind of you to help people as it can be very daunting using a new item of technology, that you care enough to make life easier for other people shows what a top fella you are. I can see the posts from all the grateful SnC users!

    Take care,

    T x

    Liked by 1 person

  11. 

    Thanks John just been watching the foiling On you tube is it going to be expensive. I wonder Thanks again John

    Sent from my iPhone

    >

    Liked by 1 person

  12. 

    Thanks John ☺ I have not long ago bought some more of your files, so I have those to play with, and also have won some lovely cutting files to make some tree baubles so I’ll update my cm600 before that. Love this machine! X

    Liked by 1 person

  13. 

    I feel a letter to santa coming on for new gizmo. Having fun with embossing kit in the meantime 😀

    Like

  14. 

    The foiling video on you tube is so longwinded John, Just stick to my toner pen in the universal holder then Minc it. far more straight forwarded. JUst wish they would update canvas with a few more editing tools like words on a curved path , or a eraser tool, , Like the free fcm ccuuting files from usa website a new one every month. The owl and thr tree have been good.

    Like

  15. 

    Thanks John! I am really ashamed to say that after I bought my CM600DX, when it was first on C&C, I have only used it once. I was so eager to get going I put 12×12 paper in green to use the tortoise shape (I had just lost my Son and his tortoise (Brian) was, and still is, with me) and the paper stuck to the mat and I was not in the right frame of mind to try again. I had registered for Canvass straight away, but my ScanNCut is still in its box with all the accessories.

    When I see all the wonderful things people create with it, I want to kick myself into action. I was lucky enough to win some cut outs that you did on a show and they are still with the machine in the box.

    I think I might give it a go again! Thanks for your posts and updates! Take care! Lorraine x

    Like

    • 

      Lorraine, I cannot imagine what you went through losing your son. It must have been so difficult and it’s no wonder that you weren’t in the right frame of mind. Definately time to give this a go though I reckon, you’ll love it.

      Like

    • 

      Lorraine I felt for you so much when I read your comment, I’m so truly sorry for your loss. Just wanted to send you a big virtual hug. I dearly hope you do get that Scan N Cut out and treat yourself to a big craft session, what these type of machines can do for your crafting is so exciting and I know you’ll have the best time. With best wishes to you and Brian xxxx

      Liked by 1 person

  16. 

    HI John,
    What can I say but a huge THANK YOU.

    It was great to stop by and see you and Maisy at the NEC on Sunday and drop some money in the collecting tin.

    Keep up the great creative inspiration.

    Crafty thanks
    Jacqui

    Like

Share Your Thoughts On This Post

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.