Designing Welded Word Frames In Scan N Cut Canvas

January 23, 2016 — 14 Comments

Following on from my previous Scan N Cut Canvas tutorials I thought that I would show you a quick and simple way of creating welded word frames.

It’s very easy, and if you have been following this series of tutorials, you will already be familiar with many of the tools that will be used.

Thanks for watching and I hope that you will give this a go.

As ever, if you have any questions or comments about this post, then please feel free to pop them in the comments section below.

I’ll see you again soon.

J :)

14 responses to Designing Welded Word Frames In Scan N Cut Canvas

  1. 

    I followed your instructions up to the point where you weld the logo to the border. The logo then disappeared!!!! I managed to transfer my design to the snc without welding and welded it on the machine, however, what I wanted to do was the mat. What am I doing wrong? I’m not using a built in logo but a name which I successfully welded, and a different shape.

    Mary

    Like

  2. 

    Hi John,

    Your tutorials are fab! ive just created a lot of word frames of my own (after lots of attempts) and cant wait to use them. When i have put them on my usb to my machine they are coming out as an whole piece as we grouped them together. How to i separate the frame from the background? thanks for help on this in advance :)

    Like

  3. 

    thank you from a newbie x x

    Like

  4. 

    Hi John
    Thanks for all your great tutorials they really do help, could you tell me is it possible to do a place card but with a heart shape and initials inside the heart so the heart pops out at the top of the place card
    Many thanks Tracey

    Like

  5. 

    John you make it look so easy and I am sure it is when you have practised and know what all the buttons do. I am going to stop playing Solitaire on my lap top while watching TV and play Scanncut canvas
    Thanks so much

    Like

  6. 

    Hi John, I do love everything you do, but this isn’t directly about all your design work, it is about the new CM900 Scan n Cut. I wondered if you had had a chance to see it yet ‘in the flesh’ and your thoughts?
    To me, it looks as though many of the niggles which have previously put me off (apart from the pennies needed!) have been ironed out? Bigger screen, colour scanning to give better scanning result, wireless, accepts more types of files and communication directly between PC and scan n cut. The only thing I would like to have seen, would be the ability to name files (rather than having to rely on numbers) and to be able to transfer more than one image at a time from PC – anyway, all in all looks great! The only electrical machines I have (I have the usual array of Caliber, Big Shot etc) are my eBosser and Silhouette Cameo.
    Unfortunately I can’t see myself being able to afford it at present, but how I should love the CM900 – are you tempted? You seem to do wonders with Canvas and your present Scan n Cut – I would be interested to read your thoughts?
    Kind regards,
    Ros

    Like

    • 

      I haven’t got one at the moment Ros and as my current one is still working fine, and a lot of the changes were included in updates for current machines, I wasn’t planning on changing anytime soon.
      It does look impressive though.
      Id say if anyone was looking to go for a scan n cut and had the pennies, get the new one.

      Like

  7. 

    Oh my goodness, two days on the trot you have shown me something I did not understand, thank you very much, I have had my Scan N Cut for months and not really cracked it, learnt more in the past two days than I have since I got it, you make everything so clear and understandable, been working along with you, repeating and repeating till I understand, thank you so much . Will have to go through your other posts and see if you have any other demonstrations.
    I do have an issue with the Scan N Cut which I have not been able to sort out, it is to do with the scan to cut process, can you tell me who I would contact to help, I did send an email to Brother support but it came back wrong address :-(. I got the address from their website.
    Thanks again for these demonstrations and look forward to any others you do.

    Like

Share Your Thoughts On This Post

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s