Some things have a big mouth, like me. Other things include the Craftwell eBosser. Wendy Timerblake recently decided to stuff it with her GoPress and Foil and through her experimentations, and subsequent kind email to me, I am delighted to share her sandwich recipe!
Plate combo appears to be as follows:
GoPress & Foil (on the bottom) and then, the 2 x A plates and the B plate. Simple when you know how!
Here is a photo that Wendy supplied, via Couture Creations.
Hope this answers that question for any Craftwell eBosser/GoPress and Foil owners out there.
If anyone else would like to share their findings, then please do drop me an email and I’ll happily share/name check.
Just a quickie today as I’ve lots on ‘behind the scenes’. Will catch up with you soon!
J :)
GENTLEMAN CRAFTER 
Hi, we have just moved house a couple of months back and have finally emptied all the removal boxes but it seems I have lost the UK power cable for my cut n boss, any ideas where I can get new cable from pleeeeease
LikeLike
I don’t sorry. Have you thought about approaching the company that makes it?
LikeLike
Could someone tell me the sandwich is for doing different vellum in my E Bosser?
LikeLike
can you use the go press with the old original eBosser
LikeLike
I am afraid that I couldn’t say for sure. I don’t think so but you might like to ask the team at Couture Creations to be 100% confident.
LikeLike
Would I be able to use this with a fabmatic machine,
please ?
LikeLike
As long as the gap between the rollers is more than 6 inches wide and 1 inch in height, then it is possible to fit the platform through. You may, however, need to add shims in order to get the right pressure.
LikeLike
Yes. It does not fit that particular range of machines. If you are interested in foiling with a Gemini they have their own add-on.
LikeLike
Thank you so much for this, I could only use the b plate and works really well, thankyo
LikeLiked by 1 person
Please help! I have been given a Gopress and foil machine with a US plug, I live in the UK and want to know will a plug adapter be okay or do I need a converter. My machine is new (never been used) boxed and has paper work but it doesn’t state either there or on the machine the wattage or voltage. Any help would be greatly appreciated!
LikeLike
You may find this article of interest – http://www.professionalrelocation.co.uk/news/using-us-made-electrical-appliances-in-the-uk/
Please bear in mind that any warranty is usually location specific so if there are any issues with or caused by the unit then it is unlikely that the warranty would cover it.
LikeLike
Thank for working out which go press sandwich feeds the Ebosser! I think I may love you & Wendy!
LikeLiked by 1 person
My gopress and foil arrived late this afternoon. Was nearly in tears as didn’t know what sandwich to use for ebosser Glad I found this help. Will now go and try the sandwich I still have an old A plate so can try that first. Thank you. Xx
LikeLiked by 1 person
Hi just wondering can you use the go press foils with the scan n cut foiling system. Just ordered the foiling system from C&C but they have no extra foils available. Thanks for your help folks
LikeLiked by 1 person
Sadly they are different so cannot be used.
LikeLike
When I tried it with my ebosser I used 1 x a plate ( coz I’ve only got 1 ), 1 x b plate and had to use about x 3 card shims.
LikeLiked by 1 person
Thank you for sharing that tip :)
LikeLike
How timely! just got my GoPress and use the CutnBoss as my usual die cutter but do have the Ebosser too so I can now start to play. Thank you both.
LikeLiked by 1 person
Thank you, John. I just got the new GoPress and Foil and it didn’t take long to fall in love with it.
LikeLiked by 1 person
Hi I used the Cut N Boss but only had to use the B plate this was with one of the Ultimate Christmas Hot foil plates.
LikeLiked by 1 person
Morning John, Will this work for the Cut N Boss …. Many thanks Pen
LikeLike
As long as the gap between the rollers is a minimum of 6 inches wide and 1 inch high, it will work.
LikeLike
Hi
I have had success with just the b plate on the cutnboss, tried several options but just the b plate on top works well as long as you guide the plate in as the b plate is semi flimsy.
LikeLiked by 1 person
Just thought I would share, you only need to use the B plate with the cut n boss , just tried it, won’t go through with all 3 plates x
LikeLike