So, the other week when I had a little “spree” at Wee Stamps, I actually bought several fairies so I thought that I’d do another colouring/card making Monday Mash Up with another one of the designs this week.
By the way, if you didn’t catch the last “colour in a fairy” blog post from me, you can visit it here – Monday Mash Up – Everybody Loves A Fairy.
Ok, leaping straight in with the colouring on this one (as this took quite a while – several evenings in fact).
I started out with the hair as this had given me jip on the last one.
I started with the GB1.
Blended in a little CT2.
Added some CT4 to make the colour a little richer.
Then went in with the GB3 for some deeper shadowy areas.
And then some GB5 to again strengthen the shadows.
Finally I blended it all in with the GB1.
So, I was happy with the blending and shading but I didn’t feel that the colour was strong enough.
Having bought the Spectrum Noir pencils a while back, and used them for various colouring projects, I hadn’t yet got around to layering them on penwork as suggested by Leann Chivers.
So I had a root through the collection to find some shades that I thought would work well and chose the 021, 090 and 094 pencils and began shading. I was pretty surprised at the result to be honest.
You can see the difference that was beginning to show in the next picture.
I did use the Derwent Blender pencil rather than a blending solution for the blending on this one though as there were some quite fine areas and using a blending pencils meant that I could work into all of the design.
Anyway, I carried on and this was the result when done.
And here is a side by side comparison of the pens vs pens/pencils.
With that technique in mind I went on to colour the rest of the design.
For the flower I used the PP1, PP4 and PP5 pens followed by the 036, 040, 038 and 083 pencils.
Here is the pen part complete.
The next picture shows the complete flower and also me starting to work on the skin with the FS1 pen.
To add some depth and shade to the skin I used the FS3 pen to trace the outer edges of the skin areas.
I then used the 085 and 008 pencils to add a little more “tone” to the skin.
For the dress I started with the GT1 pen and added shadow areas with the BGR2 pen.
I then worked in to the dress with the 062, 063 and 055 pencils.
Now, at this point I got lost in my own little world listening to Radio 4 comedies of old (Navy Lark, Round The Horne, Listen To Les etc) and just colouring, so there are a few stages missing in picture form however here is a quick description of what I used and a picture of the completed colouring.
The Wings – Overall layer of IB1, followed by shading with the 065, 068 and 066 pencils.
The leaves – Overal layer of LG2 followed by shading with the 056, 058 and 047 pencils.
Being totally honest, I have to tell you that this took quite a few hours of work – in fact several evenings – but I think that you will agree, the result was worth it. It’s a great way to round off the last couple of hours of the day and relax before heading to bed.
So, with the colouring done it was time to think about the card front and how that was going to be done.
I did have in mind that I wanted my little fairy sitting in a grassy meadow looking up into a lovely summery sky, so I need to create a mask.
I initially tried to create this by tracing and silhouetting the design on some masking film and scanning it with my Brother Scan N Cut.
Here is the traced design.
Unfortunately, although the machine recognised the outline just fine, it really didn’t like my masking film. :(
I therefore went old school and got out the light box and some masking sheets from Inkadinkado and traced the design onto that and cut it out with scissors.
Yes, I did say that I cut it with scissors and the pic above shows a craft knife. Well, that was taken before I discovered that Inkadinkado masking sheet doesn’t like a knife being dragged through it.
Anyway, here is the mask completely cut out and stuck over my coloured design (please don’t rip it, please don’t rip it).
I then went back to the Brother Scan N Cut and cut one of the built in borders, which was a grassy horizon line.
Using this as a mask I got my Perfect Spritzer out (stop sniggering) and a Meadow Green pro marker and puffed a light covering. I then added a quick spritz from a Grey Green nearer the top of the grass to give it some depth.
I created some cloud masks and added these to the design and then began spritzing over the sky area with a Pastel Green Pro Marker.
The result was quite light.
I therefore had to think a way of darkening it a little without giving myself handcramp from spritzing (no, seriously, stop giggling).
I finally decided to use some Adirondack inkpads to help so I chopped the card front down to size (as I wanted to blend the edges).
The blending foam was great for getting a nice coverage (oh, I used the Pool shade of Adirondack Brights for the colour).
I also chucked on some Lettuce and Meadow in the grassy area at the bottom, using the grassy mask again, just to tone it in with the upper area.
Looks a mess now doesn’t it? Lol.
Anyway, I also used a dotted pattern stamp from See D’s Mini Deco Backgrounds to add some stippling to, and just above, the grassy area.
It was then time to remove all of the masked areas and see what it looked like – I carefully peeled the masks away muttering, “please don’t rip it, please don’t rip it” – I nearly squealed when I had removed all of the masks and gazed at my little creation!
Lol, yes, Fairy Funtimes all round!
After doing the completely embarassing-if-seen happy dance, I started to think about the construction of the card front.
I think that I remember wanting it simple. Lol, Yeah, that.
First was a “tiny” bit of matting and layering.
And then a little more …
Ok, stop now.
All of the layers were cut using different sizes available to me on the Perfect Layers rulers.
Next I felt that it needed a little ‘something’. I liked the flower on the design and thought that it might be cool to create a three dimensional one to add to the design. I didn’t however want to do the traditional decoupage style of layers and after a good old rummage I found that I didn’t really have any dies or punches of the right shape and size.
I therefore turned to my Brother Scan N Cut again and found the perfect shape so cut it from some cardstock (that I had selected based on it’s colour match to the colouring in) and cut several different sized versions of the same shape – like so…
To give them a little dimension I did two things – colour and shape. Sounds like I’m starting up my own salon doesn’t it? lol :)
To colour I started by giving the flower a good saturating layer of the Spectrum Noir blender pen.
Lol, brilliant, you can really SEE that CLEAR fluid there can’t you?!
Next I touched the tips (naughty) with the PP5 Spectrum Noir pen, or was it PP4 – um, either would have done to be fair.
And to finish I gave it another good going over with the blender pen.
Tip: If you’re giving this colouring method a go, please work on a spare piece of card or several layers of copy paper as the ink from the pens will bleed through the flower.
I repeated this for all of the layers.
And here they all are, lining up ready to be shaped – atteeeeention!
The shaping came courtesy of a good old rub and roll from the Tonic Studios flower forming tool set.
Once shaped I stacked and stuck them all together.
The rose, I thought, would look a little out of place just on it’s own so I grabbed a Martha Stewart leaf punch and then inked the leaves up with the Adirondack greens that I had used earlier.
The sentiment choice was easy, and it’s all thanks to you lot.
You’ve all been so positive and kind to me of late, through Facebook, Twitter and on this little blog that, “Thank you for your friendship” (that I found in my box of sentiment stamps) was just the perfect thing.
I stamped it onto a strip of lightweight card that had been folded over.
I did chop a triangle into each end of that to create a sort of flaggy/pennanty thing.
Anyway, I then went on to pop it altogether and piff, paff, poof! Here she be…
Oh, yeah, forgot to say, I popped a sparkly thing from Hobby House into the rose to give it one final touch.
So, what do you reckon!?
I’m pretty proud of all of my choices on this one.
If you liked this one and want to see another “colour in a fairy” blog post from me, you can visit it here – Monday Mash Up – Everybody Loves A Fairy.
Anyway, that’s this week’s Monday Mash Up done and dusted. I hoped that you enjoyed coming on that little journey with me.
If you have any questions or comments about this post, please feel free to pop them in the comments section below.
Many thanks for reading and I’ll see you on the next post.
J :)
Absolutely brilliant so vibrant and very very fairylike…
LikeLike
Hi John,
Brilliant, the effect you’ve created looks so real. I am intending to get started with colouring soon and hope to replace my pro markers with spectrum noir pens as the finish always looks good when someone else does it! Can I ask why you needed to use the pencils to add depth of colour rather than using a different shade of pen?
Best wishes,
Fiona
LikeLike
The pencils add a richness and tone that the pens don’t offer on their own. If you take a look at the comparison image, you’ll probably get an idea of what I mean.
J :)
LikeLike
Love it love it love it x
(I mean the card) cheeky!!!!!!
Lol.
Chrisi from Darlington
LikeLike
Hi John,
Finally got around to finding your blog and so pleased I did. What a beautiful piece of colouring, a pretty stamp and a lovely card.
I will be subscribing if I can work out how!
I’m not always in a position to comment but I’m sure the notifications will truely brighten my day!
Crafty hugs,
T x
P.S. Oh look, a tickbox underneath the comments box, easy peasy! xxx
LikeLike
Welcome to the blog :) The tick box at the bottom is only for this post. If you’d like to subscribe to the blog there is a box on the side of the blog for you to enter your email address.
Nice to have you on board
J :)
LikeLike
I am starting to play with my scanNcut a bit more but am unsure how to go about cutting my cotton fabric. Do I have to use the sticky fabric sheet? Once that sheet is on the mat is that permanent or can I take it off and reapply it? I a getting confused with various people saying you can use freezer paper and/or heat’n bond lite. Help………….please.
LikeLike
There are various ways of approaching this depending on what you want to do with the fabric after you have cut it.
To be honest, my response is going to be too long winded for the comments section here however I am planning to do a full blog post about this over the next couple of weeks so don’t despair, help is on the way.
LikeLike
Thanks John I’ll look forward to your ‘cutting fabric’ blog.
LikeLike
Its really lovely
LikeLike
John your demos are amazing but you have surpassed yourself with this card, you are an extremely talented guy. thank you for your generosity. sheena xx
LikeLike
you seem to TOP every demo you do, it is brilliant, I have had one lesson in colouring from a friend and loved it, going through many aspects of craft at the moment so your tutorials are fantastic. I was thinking about downloading it but realised I only have to go to your blog for reference. Keep it going John you must have loads of patience especially with all our requests for info and Thank You x
LikeLike
Thank you. I like keeping in touch with people. It helps me avoid becoming a real hermit :)
LikeLike
Hi John. Really appreciate the time it must take you to prepare these tutorials. I treated myself to the mega bundle last week and have so far been unable to open the discs at all. Waiting on a response from CC about this. So your tutorials are brilliant as they have made me brave enough to have a go.
LikeLike
Awesome card! Love the tips on coloring the hair. This is going in my permanent craft file! Thank you!
LikeLike
It’s so beautiful John, well done
Love and Light
Sioux x
LikeLike